Code of safe operation for asbestos tile forming equipment
Before operating the asbestos tile forming equipment,it is necessary to check whether the mold installation is firm,and whether the transmission components,lubrication system,and electrical control system are normal.Adjust the working parameters of the equipment,such as pressure,speed,travel,etc.
When the equipment is running,the operator should stand in a safe position and prohibit any part of the body from being near the mold movement area.It is strictly forbidden to adjust the mold and clean up the debris during the operation of the equipment.If such operations are necessary,stop the machine,power off the machine,and take reliable safety measures.
When feeding the asbestos tile forming equipment,attention should be paid to the feeding speed and uniformity to avoid material clogging.If the material is blocked,stop the machine immediately and clean it.Do not use hands or tools to dredge the machine when it is running.
Regularly check and maintain the mold of the molding equipment,timely clean the residue and dirt on the surface of the mold,and ensure the finish and accuracy of the mold.Mold wear,deformation,etc.,should be replaced in time to avoid affecting product quality and equipment operation safety.
