The core advantages of automated production of cement fiberb
The single-shift production capacity of the traditional semi-automated production line is approximately 500 to 800 sheets(calculated based on 1220×2440mm boards),while the new fully automated cement fiberboard production line can reach 1,200 to 2,000 sheets,and it supports 24-hour continuous operation,with the equipment utilization rate increased to over 90%.
Automated control eliminates the randomness of manual operation.Online detection systems(such as infrared moisture meters and laser flatness detectors)monitor the status of the slabs in real time.After the data is fed back to the control system,the parameters are automatically fine-tuned.The rate of substandard products has dropped from the traditional 5-8 to below 1.
An automated cement fiberboard production line only requires 3 to 5 operators(responsible for monitoring the system and handling abnormalities),reducing the labor demand by 70 to 80 percent compared to traditional production,especially reducing heavy physical labor such as raw material mixing and board blank handling.
By preset parameters in the control system,the same production line can quickly switch to produce cement fiberboards of different thicknesses(3mm-50mm)and different functions(fireproof boards,partition boards,decorative boards)without large-scale equipment renovations,meeting the personalized demands of industrial and civil buildings.
