Regular maintenance of cement fiberboard equipment!
1. Regularly check the wear of easily damaged parts such as bearings and oil seals, and repair them in time if problems are found. If necessary, replace products. Gear oils of different brands cannot be mixed.
2. Regularly train on-duty employees and standard employee operating procedures.
3. Regularly check the oil level of the gearbox, if it is close to the lower limit, immediately add to the upper limit.
4. Regularly replace the lubricating oil in the gearbox. Clean the gearbox with kerosene or diesel before replacing the new oil. Normally, the equipment should be stopped after 1800 hours of operation.
5. Clean the exterior of the vibrator casing of cement fiberboard equipment to avoid hindering the heat dissipation of the motor. When handling, please handle with care to prevent damage. The smooth grease of the rolling bearing is made of composite calcium-based grease. Pay attention Clean regularly.
In order to ensure the normal production of products, the regular maintenance and inspection of
Cement fiber board equipment has become more important, and this item cannot be ignored.
