How long does it take to adjust the mold/parameters when cha
There is no fixed standard for the time it takes to adjust the molds and parameters when changing the specifications of calcium silicate board equipment.It is affected by factors such as the type of equipment,the degree of automation,and the size of specification differences.
From some actual cases and relevant information,it can be seen that the time for changing molds varies greatly.For instance,data shows that it takes 40 minutes to change the mold for a certain model of equipment.For more advanced equipment,through optimized design,it only takes 10 minutes to change the mold.
In terms of parameter adjustment,as the production process of calcium silicate board involves multiple technological links,such as molding,pressing,and curing,parameters may need to be adjusted in each link.If it is a simple specification adjustment,such as a change in thickness within a small range,the parameter adjustment may be relatively fast and could be completed within 10 to 30 minutes.However,if there is a significant difference in product specifications,such as changing the production from the conventional 1220x2440mm specification to 3000mm long plates,not only does the mold need to be replaced,but also parameters such as the winding speed,pressing pressure,curing time and temperature of the forming cylinder need to be reset and adjusted.In this case,the parameter adjustment may take 1-2 hours or even longer.
