Asbestos tile equipment
 

       Asbestos tile equipment, as a modern, high-quality and innovative machine, is more green, circular, intelligent, and efficient. Whether it is quality, function, or skills, it has strict standards. The production line is composed of seven systems such as feeding, transmission, transfer, control, palletizing, and packaging, which increase the demand and application of output. After improvement on the basis, the equipment has a higher degree of automation and more convenient operation, so that problems can be found and solved at any time, and the asbestos tile equipment should be simply overhauled before production to ensure the working status of the asbestos tile equipment. What are the precautions for the production and operation of tile equipment?

 

　　 1. Because cement is easy to condense into agglomerates during production, the materials should be stirred according to the production, and the mixture should not be stored for a long time;

 

　　2. Pay attention to loading and feeding. Stirring especially hard debris is especially easy to cause damage to equipment parts;

 

　　3. Check whether the pallet is clean, and find the bonded material block, which must be shoveled off before being sent to the equipment pallet library;

 

　　4. The pressing time of asbestos tiles should be strict and precise. When necessary, the density of asbestos tiles can be adjusted by adjusting the supply amount, and it is necessary to observe whether the various processes are operating normally at any time;

 

　　5. It must be consistent with the mold plane during production. During operation, the mold frame and the feeding platform are not on the same plane, which will damage the feeding trolley;

 

　　6. ​​When the asbestos tile equipment is in production, the equipment should be checked and repaired. The power supply must be plugged in, and live operation is strictly prohibited.