The calcium silicate board equipment includes a series of calcium silicate board production lines. What equipment does the calcium silicate board production line need? The calcium silicate board production line is configured differently according to the processing technology and annual output. Flowing method calcium silicate board production line equipment: pulp processing system, pulp section, plate stacking and demoulding section, pressure steam curing section, edge grinding and chamfering sanding section.

 

There are mainly the following methods for the production of calcium silicate board:

 

1. Flow slurry method: The principle is that the slurry is spread on the felt, dehydrated and laminated; the equipment requirements are simple and the output is low.

 

2. Copying method: The principle comes from the rotary screen papermaking process; the equipment requirements are high and the output is high.

 

3. Extrusion molding method: semi-wet production is adopted, and pressure extrusion is used to form the required shape; this method is rarely used in China.

 

The above three methods are mainly copy method and flow method. For details, you can consult Fang Ruizheng and technicians according to the raw materials and output of calcium silicate board produced. We will design the most suitable production line and Device Configuration