Asbestos tile machine
 

       The Asbestos tile machine adopts PLC automatic control, which is stable, reliable, efficient and high-yield; it adopts compression molding, the product structure is perfect, and the variety is wide, which can meet the needs of various houses; it is only convenient and can be used for a long time. The equipment is powerful and equipped with various molds. The use of program operation improves the safety production efficiency of the equipment. So, how to operate the newly bought asbestos tile machine?

 

　　 1. Before starting the asbestos tile equipment, first check whether the equipment and electrical appliances are in good condition, and cut off the power when off work.

 

　　 2. When the fully automatic asbestos tile equipment is in operation, do not put shovel or other objects into the mixer.

 

　　 3. Ensure that the mixing time of each automatic asbestos tile equipment is not less than 120 seconds.

 

　　 4. Operators should pay attention to the safety of the operating environment. Such as the hopper, the position of the discharge port, etc.

 

　　 5. Non-operators are not allowed to operate casually.

 

　 　6. ​​Adjust the amount of water added to each machine according to the moisture content of the yellow sand to make the mixture damp and suitable.

 

　 　7. If the operator needs to enter the mixer for inspection, he must cut off the power supply and set up a special person for supervision.

 

　　 8. Make a record of mixing according to the notice of mixing ratio.

 

　　 9. The operator should carefully fill in the on-duty operation record.

 

　　10. After production, clean up the excess material in the fully automatic asbestos tile equipment and conveyor belt in time and flush it out to keep the surroundings clean and hygienic.