Information summary:
For the insiders, asbestos cement tile is a roof waterproofing material made of asbestos fiber and cement as raw materials and pressurized by a board. It is divided into three types: large wave, medium wave and wavelet in terms of specificat...
For the insiders,
asbestos cement tile is a roof waterproofing material made of asbestos fiber and cement as raw materials and pressurized by a board. It is divided into three types: large wave, medium wave and wavelet in terms of specifications. These three kinds of tiles are matched with the herringbone back tiles used to cover the roof ridge. Asbestos tiles are characterized by a large single sheet area, a large effective use area, fire prevention, moisture resistance, corrosion resistance and heat resistance, cold resistance, light weight and other characteristics, and are easy to produce, low in cost, and widely used.
Operation process:
First press down the single pressing rod (roller) in the middle, and then press down the two adjacent left and right at the same time, so that the pressure is symmetrical and double in turn, so that the asbestos cement is wet and gradually collapsed to the middle into the same waveform as the tile mold. . Lift all the pressure rods. At this time, the bump on the gear toggles the travel switch through the lever. When the motor stops, another motor starts immediately, and the drive roller on the bridge is driven to rotate through the reducer and sprocket. The waved tile is sent away together with the tile mold.