Calcium silicate board equipment
 

        The calcium silicate board equipment is in normal production, and it needs to be maintained regularly to ensure the normal operation of the equipment and whether there are any problems and solve them in time.
 

　　 In the production process, the normal operation of Calcium silicate board equipment is related to normal production and increased output.

 

　　Four steps to ensure the normal operation of calcium silicate board equipment:

 

　　一: Check the calcium silicate board equipment before starting the machine, mainly to keep the mold clean.

 

　　二: Open the cooler season. Before the start of summer, the cooler should be turned on. In winter, the residual heat of an empty machine is half an hour. When the temperature of the device exceeds 45 degrees, the cooler turns on again.

 

　　三: After shutting down, test the calcium silicate board equipment. Check whether the key moving parts of the equipment such as molds, bearings, and screws are normal.

 

　　四: After shutting down every day, it is necessary to set up cleaning work for molds, material carts, and machines. Calcium silicate board equipment requires proper amount of operating parts.