The selection method of cement fiberboard equipment_Gongyi Fangrui Zhenghe Machinery Factory

your location： Gongyi Fangrui Zhenghe Machinery Factory > news >

The selection method of cement fiberboard equipment

Author：admin source：未知 Release date：2025-07-17 09:50

Information summary：

　　Choosing the right cement fiberboard equipment is the key to ensuring production efficiency,product quality and returns.The production process of cement fiberboard(such as flat pressing method,roller pressing method,slurry flow method,...

　　Choosing the right cement fiberboard equipment is the key to ensuring production efficiency,product quality and returns.The production process of cement fiberboard(such as flat pressing method,roller pressing method,slurry flow method,etc.)directly determines the type of equipment,and the core process objective needs to be clarified first.

　　If high-density boards(such as load-bearing wall panels and floor slabs)are pursued,emphasis should be placed on"high-pressure forming"equipment(mainly flat press).

　　If lightweight panels(such as ceiling panels and non-load-bearing partition walls)are to be produced,"low-pressure forming"or"slurry forming"equipment can be considered.

　　If continuous production is required(high capacity demand),the roller pressing production line is more suitable.If the flatness of the board is emphasized(such as decorative panels),flat-pressing equipment is more preferred.

Cement fiberboard equipment

　　Pressing method

　　Flat press type:Suitable for producing thick plates(≥10mm),with uniform plate density and high strength,but it is an intermittent production process with relatively low efficiency.

　　Roller pressing type:Continuous production,suitable for thin plates(≤10mm),high efficiency,but strict requirements for the uniformity of raw materials;

　　Slurry flow type:Suitable for boards with high fiber content(such as wood fiber cement boards),the board texture is fine,but the slurry concentration needs to be accurately controlled.

　　The pressing pressure directly affects the density of the board(the standard board density is 1.2-1.8g/cm³).It is necessary to select equipment with adjustable pressure(such as 100-300T/㎡)to meet the requirements of different products.

【related suggestion】

Previous：The automation and intelligence of calcium silicate board eq
: next：没有了

Back to list

Product Center

Asbestos pipe equipment

Calcium silicate board equipmen

Asbestos tile equipment

Cement fiber board equipment

Calcium silicate board producti