Will the production capacity of the asbestos tile equipment_Gongyi Fangrui Zhenghe Machinery Factory

your location： Gongyi Fangrui Zhenghe Machinery Factory > news >

Will the production capacity of the asbestos tile equipment

Author：admin source：未知 Release date：2025-11-27 09:41

Information summary：

　　After 3 to 5 years of use,the production capacity of asbestos tile equipment is likely to decline.The decline mainly depends on the maintenance level,usage intensity,material and environment,as follows:...

　　After 3 to 5 years of use,the production capacity of asbestos tile equipment is likely to decline.The decline mainly depends on the maintenance level,usage intensity,material and environment,as follows:

　　I.Core Manifestations of Capacity Decline

　　1.Slower production rhythm:Wear of stirring blades,forming rollers,etc.,leads to a decrease in the efficiency of slurry mixing,forming,and dewatering,and extends the production cycle of the same batch.

　　2.Reduced useful operation rate:The aging of hydraulic seals and the increase in electrical component failures have led to a 30%to 50%increase in the number of shutdowns for maintenance compared to the initial stage,and the actual production time has been shortened.

asbestos tile equipment

　　3.Decline in pass rate:The accuracy of molds has decreased,there are deviations in the measurement of ingredients,the scrap rate has risen,and rework and supplementary production have indirectly reduced production capacity.

　　4.Energy consumption superimposed shrinkage:The wear of the motor and pump body leads to increased operating resistance,rising unit energy consumption,and some equipment needs to operate at reduced load.

　　Ii.Key Influencing Factors

　　Maintenance level:Regularly replace vulnerable parts,calibrate equipment,and implement anti-corrosion lubrication.The reduction in production capacity can be controlled within 10%.If maintenance is lacking,the reduction rate can reach 20%to 40%.

　　Usage intensity:With 24-hour continuous production and frequent specification changes,the capacity decline is 20%-30%higher.

　　Material and environment:In an environment with high temperature,high humidity and a lot of dust,the components of ordinary carbon steel equipment corrode faster and the decline in production capacity is more obvious.

　　Raw material stability:Large fluctuations in raw materials increase the difficulty of debugging,accelerate component wear and tear,and amplify the decline in production capacity.

　　The period of 3 to 5 years is the critical time for equipment performance degradation.Standardized maintenance can delay the decline.At this time,replacing core vulnerable parts and calibrating the system can restore most of the production capacity.

【related suggestion】

Previous：How to determine if the stability of calcium silicate board
: next：没有了

Back to list

Product Center

Asbestos pipe equipment

Calcium silicate board equipmen

Asbestos tile equipment

Cement fiber board equipment

Calcium silicate board producti