What is the raw material conversion rate of the cement fiber_Gongyi Fangrui Zhenghe Machinery Factory

your location： Gongyi Fangrui Zhenghe Machinery Factory > news >

What is the raw material conversion rate of the cement fiber

Author：admin source：未知 Release date：2025-12-11 09:44

Information summary：

　　The raw material conversion rate,waste generation volume and recycling situation of cement fiberboard equipment mainly depend on the level of equipment automation and process design,as follows:...

　　The raw material conversion rate,waste generation volume and recycling situation of cement fiberboard equipment mainly depend on the level of equipment automation and process design,as follows:

　　1.Raw material conversion rate:Automated equipment,with its precise batching,uniform molding and meticulous curing,generally achieves a conversion rate of over 90%.Due to issues such as proportioning errors and uneven molding,the conversion rate of traditional simple equipment is only 75%to 85%.If a recycling system is provided for the production of high-density boards,the utilization rate of raw materials can be further improved.

Cement fiberboard equipment

　　2.Waste generation:No large amount of waste will be produced.The main sources are cutting scraps,sanding dust and a small amount of substandard boards.The automated production line,through designs such as computer-controlled measurement and mold optimization,has a waste material ratio of only 5%to 10%.Due to the low cutting accuracy and poor stability of traditional manual or outdated equipment,the proportion of waste materials may reach 10%to 15%.

　　3.Waste recycling and utilization:Waste can be recycled and the process is mature.After being crushed and ground,the scraps and waste boards can replace part of the raw materials such as quartz sand and be mixed into new materials(the proportion of waste materials from high-density boards can reach 15%).In some processes,recycled materials can also replace quartz sand.The dust,after being collected and treated,can also be reused in the batching process,which not only reduces the cost of raw materials but also lessens the pressure of green development.

【related suggestion】

Previous：How can the loss of calcium silicate board equipment be cont
: next：没有了

Back to list

Product Center

Asbestos pipe equipment

Calcium silicate board equipmen

Asbestos tile equipment

Cement fiber board equipment

Calcium silicate board producti