What are the specific steps for cleaning the mixing system o_Gongyi Fangrui Zhenghe Machinery Factory

your location： Gongyi Fangrui Zhenghe Machinery Factory > news >

What are the specific steps for cleaning the mixing system o

Author：admin source：未知 Release date：2026-03-05 10:14

Information summary：

　I.Power-off and Shutdown:First,stop the feeding,stirring and conveying systems,then turn off the power supply and hang a maintenance warning sign.Confirm that the equipment has stopped to prevent accidental startup....

Calcium silicate board equipment 　　

II.Emptying Remaining Materials:Open the discharge port of the mixing tank and empty all the remaining slurry in the tank to avoid difficulty in cleaning after it dries out.

　　III.Water Pre-rinse:Inject clean water into the mixing tank,start the stirring at a low speed for 3 to 5 minutes,and conduct a preliminary rinse on the tank wall,stirring shaft,and discharge port to dilute the residual slurry.

　　IV.Manual Removal of Clumps:After the machine stops,open the maintenance port,use a shovel and scraper to remove the dry clumps on the tank wall,stirring shaft,and blades,with a focus on cleaning the corners and roots to prevent them from falling and affecting the quality of the plates.

　　V.Circulating Rinse:Connect the water supply to rinse the feed pipe,return pipe,valves,and filters,and repeat the process 2 to 3 times to ensure the pipeline is unobstructed.

　　VI.Check the Mixing Components:After cleaning is completed,check the wear and looseness of the stirring blades,and check if the sealing parts are leaking.If any abnormalities are found,tighten or replace them in time.

　　VII.Emptying Sewage and Cleaning:Drain all the rinsing water,clean the ground and the surrounding of the equipment,and keep the site clean.

　　VIII.Record and Reset:Make a cleaning record,close the maintenance port and discharge port,confirm there are no errors,then remove the warning sign and restore the equipment to standby mode.

　　IX.Regular Cleaning:By following these steps regularly,it can prevent slurry from clumping,uneven stirring,and pipeline blockages,ensuring stable sampling and forming.

【related suggestion】

Previous：Replacement and maintenance methods for vulnerable parts of
: next：没有了

Back to list

Product Center

Asbestos pipe equipment

Calcium silicate board equipmen

Asbestos tile equipment

Cement fiber board equipment

Calcium silicate board producti