The typical application of calcium silicate board provides many benefits for our building material innovation, energy saving and environmental protection. But in addition, due to the small size, low management level and immature technology of most wallboard manufacturers, the quality of the products produced cannot make People are satisfied, it can't work normally after installation. Then there are several factors that affect the quality and installation of calcium silicate board.

 

　　 1. Raw material selection. The composition ratio of raw materials and the quality directly affect the quality of the product. Before selecting and using suitable raw materials, according to the technical requirements and characteristics of the product, the necessary quality inspection, testing and economical and reasonable mixing ratio of the raw materials must be carried out.

 

　 　2, construction method. Whether the construction plan is effective and whether the operation method is correct will affect the quality of the product. In this regard, you can refer to industry standards or peer practices.

 

        3. Properly handle plate cracks: The appearance of cracks between lightweight partition walls is inevitable according to their own structure. This is why many lightweight partition manufacturers must develop more stringent new quality and lightweight partitions. For today’s lightweight partitions, attention should be paid to the selection of feeler gauges and adhesives, as well as time control. Only in accordance with the operating specifications can we strictly maintain the quality of the lightweight partitions and auxiliary materials and adopt reasonable construction techniques. Solve the crack control of lightweight wall panels.

 

　　 4. Production equipment. When purchasing equipment, you must consider not only cost, but also productivity, operational reliability, and maintainability. In particular, it should be noted that before purchasing calcium silicate board equipment, the necessary operation tests must be carried out on the equipment, and you cannot buy it blindly.

 

　 　 5. Maintenance conditions. Some manufacturers ignore the repair ring of the finished product and store the product under inappropriate temperature and humidity conditions, which causes the strength of the calcium silicate board to decrease, cracks or warpage.

 

　　 After understanding the above points about the factors that affect the quality and installation of calcium silicate board, it is clear that the choice of good Calcium silicate board equipment can produce good quality calcium silicate board.