Calcium silicate board has stable function and low cost. The use of this inorganic thermal insulation material in engineering. In the future, with the development of low-carbon economy, my country will have higher and higher requirements for building energy saving, and the use of inorganic insulation materials will become more and more widespread. The panels produced by Fang Ruizheng and Calcium silicate board equipment need to pay attention to details in the construction. The impermeability of the external thermal insulation material and the air permeability of the thermal insulation system should be considered, so as to avoid freezing and thawing damage and causing tiles to fall. The fire rating of the external thermal insulation system should be improved to avoid vagueness caused by fires and other incidents. The external insulation system loses its integrity and collapses under the influence of the gravity of the brick surface. It is necessary to improve the seismic resistance and wind pressure resistance of the calcium silicate board to avoid the huge damage to the external insulation system of the horizontal force after the incident. Because the calcium silicate board is placed on the outer layer of the main structure, external forces such as thermal stress, fire, water or steam, wind pressure, earthquakes, etc. directly act on its surface.

Calcium silicate board equipment
 

　　 It is necessary to adopt corresponding safety reinforcement measures to ensure that the building materials and insulation system itself maintain the necessary stability, and avoid quality incidents such as cracking, bulging, and falling of the veneer tiles. Paste facing bricks on the external thermal insulation wall, the foam cement board should be formed into a whole under the premise of protecting the thermal insulation layer, and the load effect of the facing brick facing layer should be transferred to improve the strength of the facing brick attached to the base layer to meet the standard requirements . It is necessary to consider the crushing rate, bonding strength, weather resistance and other indicators of aluminum silicate products, as well as the compatibility of the deformation of the entire external insulation system to release and absorb heat or other pressures. The calcium silicate board produced by Fang Ruizheng and the calcium silicate board equipment is a closed microporous mesh structure combined with a solid substrate. Electrostatic inorganic insulation materials contain non-metals such as magnesium, aluminum, and silicate. Mineral sepiolite is the base material, with a certain amount of auxiliary materials and fillers, and then a quantitative chemical additive; it is made of new technology and new technology.