With the acceleration of urbanization, the Asbestos tile machine is developing in the direction of large-scale development, and the demand for production technology and equipment continues to increase. With the continuous increase of market demand, more and more requirements are put forward on equipment. In terms of production, the improvement of production efficiency technology and the increase of types.

 

　　Asbestos tiles can be produced by the asbestos tile machine. The daily operation and maintenance of the asbestos tile machine should be noted:

 

　　 1. Before starting the asbestos tile equipment, first check whether the equipment and electrical appliances are in good condition, and cut off the power when off work.

 

　　2. When the fully automatic asbestos tile equipment is in operation, do not put shovel or other objects into the mixer.

 

　　3. Ensure that the mixing time of each automatic asbestos tile equipment is not less than 120 seconds.

 

　　 4. Operators should pay attention to the safety of the operating environment. Such as the hopper, the position of the discharge port, etc.

 

　　 5. Non-operators are not allowed to operate casually.

 

　　6. ​​Adjust the amount of water added to each machine according to the moisture content of the yellow sand to make the mixture damp and suitable.

 

　　7. If the operator needs to enter the mixer for inspection, he must cut off the power supply and set up a special person for supervision.

 

　　 8. Make a record of mixing according to the notice of mixing ratio.

 

　　 9. The operator should carefully fill in the on-duty operation record.

 

　　10. After production, clean up the excess material in the automatic asbestos tile machine automatic and the conveyor belt in time and flush it out to keep the surrounding clean.