Calcium silicate board equipment has evolved from＂single-po_Gongyi Fangrui Zhenghe Machinery Factory

your location： Gongyi Fangrui Zhenghe Machinery Factory > news >

Calcium silicate board equipment has evolved from＂single-po

Author：admin source：未知 Release date：2025-10-10 09:20

Information summary：

　　The traditional calcium silicate board production line(such as the papermaking method and the slurry flow method)has the problem that the equipment in each link of"raw material pretreatment-slurry preparation-molding-curing-finished pr...

　　The traditional calcium silicate board production line(such as the papermaking method and the slurry flow method)has the problem that the equipment in each link of"raw material pretreatment-slurry preparation-molding-curing-finished product processing"operates in isolation,which is prone to production interruption due to"insufficient supply of materials in the previous process,waiting of equipment in the subsequent process,and parameter mismatch"(with an average daily downtime of 1-2 hours).The new type of equipment achieves seamless connection throughout the entire process through"hardware interconnection+timing coordination".

Calcium silicate board equipment

　　Raw material pretreatment-slurry preparation linkage:The raw material homogenization warehouse,crushing unit,fiber disperser and slurry mixing tank are interconnected through PROFINET industrial Ethernet.When the slurry level in the slurry mixing tank is lower than the set value,the system automatically triggers the raw material pretreatment unit to speed up,and accurately matches the dosage of aggregates,fibers and additives(based on real-time slurry concentration data).Avoid"excessive feeding leading to blockage"or"insufficient feeding causing the agitator tank to idle",and ensure a continuous and stable supply of slurry.

　　Forming·curing.Finished product processing linkage:The slurry forming machine,curing kiln,and CNC panel cutting machine achieve speed matching through the servo motor synchronous control system-for example,when the production speed of the forming machine increases from 10m/min to 12m/min,the conveyor belt speed of the curing kiln automatically synchronously increases(to avoid wet blank accumulation).The cutting frequency of the subsequent panel cutting machine was also adjusted simultaneously(from 3 times per minute to 3.6 times per minute).At the same time,the panel cutting machine automatically adjusted the cutting parameters(such as cutting depth and blade head speed)based on the"sheet thickness and width data"output by the forming machine,achieving uninterrupted flow from"forming-curing-cutting",and avoiding the 15-30 minutes of downtime and waiting caused by traditional manual adjustment.

【related suggestion】

Previous：The core value of cement fiberboard equipment-From＂cost con
: next：Asbestos tile equipment is equipped with an advanced control

Back to list

Product Center

Asbestos pipe equipment

Calcium silicate board equipmen

Asbestos tile equipment

Cement fiber board equipment

Calcium silicate board producti